New Aftermarket Cartridge for Eaton Vickers VQ Series Single Pump 35VQ Available

$98

This Single Pump Cartridge Kit is designed for Eaton Vickers Vane Pump 35VQ Cartridge replacement.

Features

  • This Vane Pump is designed for medium pressure multiple industrial applications.
  • Easy to replace without removing the pump from its mounting in 10 minutes.
  • Intra-vane cartridge design with 10 vanes provides long operating life, outstanding volumetric efficiency up to 90%, and excellent serviceability.
  • The super-quiet as low as 62 dB(A), ideal for the indoor industrial environment.

Options

  • Note *

  • Cartridge *

  • Series *

  • Displacement *

  • Design Number *

  • Direction of Rotation *

There are varieties of displacement selections for this vane pump cartridge from 67,0 to 143,0 ml/rev. The max pressure can support up to 210 bar for the instance use case. Also, The rotation speed supports from 600 to 2500 r/min using the different oil types.This vane pump allows low flow at high pressure and high flow at lower pressure. A clever way to optimize your circuit design and to sustain consistency power and flow. This pump also provides fast pressure cycle change with a precise flow.

Here are links for Single Pump Cartridge kit:

20-VQ

25-VQ

35-VQ

45-VQ

20V

25-V

35-V

45-V

Here are several links for Single, Double and Triple Pumps use this kit for replacement:

VQ Series Double and Triple Pump Cartridge Rear Kit 4535-VQ 4535-VQSV10

VQ Series Double and Triple Pump Cartridge Front Kit 3520VQ 3525VQ 3520VQSV10 3525VQSV10

Vane Pump Cartridge More Features & Benefits:
  • Reduced energy consumption: Up to 90% Efficiency; reduces heat generation.
  • Low noise level: Optimized for the lowest noise level in the smallest envelope.
  • Increased lifetime: Double lip vane design raises dirt resistance to increase lifetime.
  • Easy installation: Use the same body for all displacements. The port orientation allows customized installation.
Applications:
  • Presses
  • Agricultural
  • Construction
  • Material handling
  • Lubrication
  • Machines tools
General Applications Instructions:
  • Check speed range, pressure, temperature, fluid quality, fluid viscosity, and pump rotation.
  • Check the inlet conditions of the pump, if it can accept the application requirements.
  • Check the type of shaft: if it will support the operating torque.
  • Check the coupling to cut pump shaft load (weight, misalignment).
  • Filtration: must be adequate for the lowest contamination level.
  • Check the environment of the pump: avoid noise reflection, pollution, and shocks.
Start-up :
  • Fill the tank up with a clean fluid in proper conditions.
  • We recommend flushing the system with an external pump before the start-up.
  • It is important to bleed the air off the circuit & the pump itself.
  • The first valve on the circuit should be open to the tank.
  • We recommend the use of air bleed-off valves.It is possible to bleed off the air by creating a leak in the P port of the pump.
More:
  • We stock replacement parts for our VQ and V series aftermarket line.
  • We are expanding our product range, so please check back often for our new product offering.
  • If you have special requests, feel free to contact us. By the way, we have a strong project team for customized requirements.
Weight 7 kg
Note

F3 – Viton seals, Omit – if not required

Cartridge

Single Pump Kit

Series

35VQ

Displacement

21, 25, 30, 32, 35, 38, 45

Direction of Rotation

L = Counter-clockwise, R = Clockwise

Design Number

10

Reviews

There are no reviews yet.

Be the first to review “New Aftermarket Cartridge for Eaton Vickers VQ Series Single Pump 35VQ Available”

Your email address will not be published. Required fields are marked *

How can we help?

We reply in 24 hours.