New Aftermarket Vane Pump Parker Denison T Series Double Pump Cartridge Rear Kit T7DD(S) T7ED(S) T7D(S) Available

$224

This Double Pump Cartridge Rear Kit is designed for Parker Denison Vane Pump T7DD(S) T7ED(S) Cartridge replacement.

Features

  • With dowel pin vane structure, it can work in high pressure, low noise and long lifetime.
  • This vane pump can fit wide viscosity hydraulic oil and be started at low temperature and work at high temperature.
  • As the vane pump adopts bilabial structure vane, it has oil pollution resistance and wide speed scope.

Options

  • Cartridge *

  • Series *

  • Displacement *

  • Direction of Rotation *

  • Seal Class *

There are varieties of displacement selections for this vane pump cartridge from 44,0 to 137,5 ml/rev. The max pressure can support up to 300 bar for the instance use case and up to 250 bar for the continuous case. Also, The rotation speed supports from 600 to 3000 r/min using the different oil types.This vane pump allows low flow at high pressure and high flow at lower pressure. A clever way to optimize your circuit design and to sustain consistency power and flow. This pump also provides fast pressure cycle change with a precise flow.

Here are several links for Single, Double and Triple Pumps use this Cartridge for replacement:

T Series Single Pump Cartridge T7D(S)

T Series Double Pump Cartridge Front Kit T7DB(S) T7DD(S) T7D(S)

Vane Pump T7D(S) Cartridge More Features & Benefits:
  • Reduced energy consumption: Up to 94% Efficiency; reduces heat generation.
  • Low noise level: Optimized for the lowest noise level in the smallest envelope.
  • Increased lifetime: Double lip vane design raises dirt resistance to increase lifetime.
  • Easy installation: Use the same body for all displacements. The port orientation allows customized installation.
Applications:
  • Presses
  • Injection machines
  • Lubrication
  • Machines tools
General Applications Instructions:
  • Check speed range, pressure, temperature, fluid quality, fluid viscosity, and pump rotation.
  • Check the inlet conditions of the pump, if it can accept the application requirements.
  • Check the type of shaft: if it will support the operating torque.
  • Check the coupling to cut pump shaft load (weight, misalignment).
  • Filtration: must be adequate for the lowest contamination level.
  • Check the environment of the pump: avoid noise reflection, pollution, and shocks.
Start-up :
  • Fill the tank up with a clean fluid in proper conditions.
  • We recommend flushing the system with an external pump before the start-up.
  • It is important to bleed the air off the circuit & the pump itself.
  • The first valve on the circuit should be open to the tank.
  • We recommend the use of air bleed-off valves.It is possible to bleed off the air by creating a leak in the P port of the pump.
More:
  • We stock replacement parts and cartridge kits for our T series aftermarket line.
  • We are expanding our product range, so please check back often for our new product offering.
  • If you have special requests, feel free to contact us. By the way, we have a strong project team for customized requirements.
Weight 8.3 kg
Cartridge

PCT – Rear Kit

Series

T7DD(S), T7ED(S)

Displacement

B14, B17, B20, B22, B24, B28, B31, B35, B38, B42

Direction of Rotation

L = Counter-clockwise, R = Clockwise

Seal Class

1 = S1 BUNA N – 0,7 bar max. (for mineral oil), 4 = S4 EPDM – 0,7 bar max. (for fire resistant fluids), 5 = S5 VITON® – 0,7 bar max. (for mineral oil and fire resistant fluids)

Reviews

There are no reviews yet.

Be the first to review “New Aftermarket Vane Pump Parker Denison T Series Double Pump Cartridge Rear Kit T7DD(S) T7ED(S) T7D(S) Available”

Your email address will not be published. Required fields are marked *

How can we help?

We reply in 24 hours.